How it Works

Cipher practically latches itself. Bring the two halves close together, and let physics take care of the rest, thanks to a pair of high strength neodymium magnets and our patent pending design.

The tail or "flap" of the belt tucks underneath, for a clean, streamlined look. When you're ready to remove your belt, just push and twist to unlatch.

With its interlocking geometry, the latch is stable and secure under load, so you can confidently wear it everywhere.

When you remove your Cipher belt, the sizing stays adjusted to you, ready for next time. The male buckle glides through your belt loops with ease.

Hence, this is "the belt you NEVER have to re-adjust."

Well, almost never... If your weight fluctuates, or you change out some gear.. Or eat too much at the dinner table, that's when you'll appreciate infinite adjustment.

To Adjust Sizing: Simply turn the rotor counter-clockwise, slide the strap to where you like it, and re-tighten. The clamping mechanism provides a large mechanical advantage to lock the strap in place, so your belt will hold it's size day after day.

Made in the USA with 100% USA sourced materials and labor.

Belt Sizing Notes

In order to make sure you get the exact size you need, we have created a sizing chart to reference.

"Waist Size" is the distance around your waist, as measured through the belt loops of your pants. Note that your "waist size" is usually slightly larger than your Pants Size, partly because the belt has to wrap around your pants in addition to your waist, and partly because most pants are trying to make you feel a bit skinnier than you may actually be! All belts will be made longer than your waist size, to provide room for adjustment.

For double layer belts, the sizing is most critical. MEASURE YOUR WAIST WITH A TAPE MEASURE, THROUGH THE BELT LOOPS if you are unsure, and reference the WAIST SIZE column of the chart below.

For reference: The Cipher, Epoch, Bezel and Ti Hook webbing (all variations) fit through all Kuhl™ brand clothing. If your current 1 1/2" belt fit, these belts will fit.

If the sizing chart does not go small or large enough for you, email: CarbonTactics@215Gear.com for a custom quote.

Carbon Tactics Belt Sizing

• Small: (Actual Waist Size) 26-31"

• Medium: (Actual Waist Size) 30-35"
  

• Large: (Actual Waist Size) 35-40"
  

• Extra Large: (Actual Waist Size) 40-45"